🚚 Free Worldwide Shipping on All Orders!Shop Now
HomeStore

Sound Clamping Monopole Electrode Hardware Kit

Product image 1

Sound Clamping Monopole Electrode Hardware Kit

Screw, inserts, clips and conductive rubber electrode hardware kit.

If you want to make one of my Sound Clamping Monopole Electrodes, you can obtain the STL files here - STL FILES.

You can buy a fully assembled electrode printed in vapour-smoothed ABS here: Sound Clamping Electrode.

Once you have printed your parts, I can supply a hardware kit with everything you need to finish building this electrode. This makes it easy, as some parts are only available in bulk if purchased elsewhere.

This kit contains:

  • 1 x 6mm Conductive Rubber, approximately 16cm/6.5" long.
  • 1 x 4mm Conductive Rubber, approximately 30cm/11" long.
  • 2 x M3 heat set inserts (you only need one but I supply two incase you lose it before fitting it in place).
  • 1 x M3x18 Bolt, nylon.
  • 2 x Conductive rubber cord locks.

Screw, inserts, clips and conductive rubber electrode hardware kit.

If you want to make one of my Sound Clamping Monopole Electrodes, you can obtain the STL files here - STL FILES.

You can buy a fully assembled electrode printed in vapour-smoothed ABS here: Sound Clamping Electrode.

Once you have printed your parts, I can supply a hardware kit with everything you need to finish building this electrode. This makes it easy, as some parts are only available in bulk if purchased elsewhere.

This kit contains:

  • 1 x 6mm Conductive Rubber, approximately 16cm/6.5" long.
  • 1 x 4mm Conductive Rubber, approximately 30cm/11" long.
  • 2 x M3 heat set inserts (you only need one but I supply two incase you lose it before fitting it in place).
  • 1 x M3x18 Bolt, nylon.
  • 2 x Conductive rubber cord locks.
$6.71

Original: $19.16

-65%
Sound Clamping Monopole Electrode Hardware Kit—

$19.16

$6.71

Description

Screw, inserts, clips and conductive rubber electrode hardware kit.

If you want to make one of my Sound Clamping Monopole Electrodes, you can obtain the STL files here - STL FILES.

You can buy a fully assembled electrode printed in vapour-smoothed ABS here: Sound Clamping Electrode.

Once you have printed your parts, I can supply a hardware kit with everything you need to finish building this electrode. This makes it easy, as some parts are only available in bulk if purchased elsewhere.

This kit contains:

  • 1 x 6mm Conductive Rubber, approximately 16cm/6.5" long.
  • 1 x 4mm Conductive Rubber, approximately 30cm/11" long.
  • 2 x M3 heat set inserts (you only need one but I supply two incase you lose it before fitting it in place).
  • 1 x M3x18 Bolt, nylon.
  • 2 x Conductive rubber cord locks.
Sound Clamping Monopole Electrode Hardware Kit | Joannes E-Stim Emporium